Prusa Mini

r/3Dprinting·Calypso_maker·Jul 2026

Positive

Starter printer for 9 year old

I’d recommend the Prusa Mini—it might be a little over your $300 budget, but the ability to fix it and get help through the future makes it worth it. Mine has been an unbelievably reliable workhorse for the last 6 years.

YouTube·Prof Polymath

Neutral

Who Wins ?? Prusa Mini vs Snapmaker 2

The Prusa Mini Plus started printing quickly due to its fast auto bed leveling and maintained an early lead with a very high infill speed. However, it ultimately finished five minutes behind the Snapmaker in this specific comparison.

r/prusa3d·nur00·Jun 2026

Negative

Can you add a Prusa Mini on octoprint to prusa connect?

Hey all, I recently got a prusa mini for free. I've done some rehab and some upgrades like a handle, filament sensor and pi camera. I did look into the native prusa esp wifi module. Its just lacking to many features. Is there a way to hook octoprint with the mini into prusa connect? Currently I use prusa connect to monitor an mk4s and a mk4s with mmu3, would be nice to have the mini there too.

YouTube·A-Make Designs

Positive

Prusa Mini Clone Kit from Aliexpress: did I make something stupid?

The creator buys this kit from Aliexpress, planning to assemble it and compare its total cost and performance against his original Prusa Mini, noting it comes as loose parts and requires printing additional components.

r/3dprinter·brandon_c207·Oct 2025

Negative

Newbie printer recommendations?

TLDR: Any Bambu Labs printer in your budget should be fine, but I'd lean towards the P1S. If you're looking for something a lot less expensive to get use to 3D printers, a Sovol SV06 is a great option. You may want to check out the Elegoo Centauri Carbon or Sovol CoreXY machines as well. For your budget, you could get a Bambu Labs printer like the A1 Mini (or combo if multi-color prints are very important to you), A1, or P1. You can get the P1S if you're willing to go up on your budget a little more (currently about $550 last I checked). I haven't personally used these, but have heard decent things from people I know that are using the X1C from Bambu Labs. Other options for a CoreXY printer is the Elegoo Centauri Carbon. I haven't looked too much into it, but I have seen it recommended as an inexpensive CoreXY machine that's not Bambu Labs. Other options that fits within your budget are the Sovol 3D printers. I personally have a Sovol SV06 and have been able to print fine with PLA and PETG. Currently, the SV06 is about $159. If you don't need a large print volume, there's the Sovol Zero (based off the Voron Zero printers) and if you need a larger volume, they have the SV08 (based on the Voron 2.x printers) for just over your budget. Finally, the Prusa Mini+ is within your budget for either the kit or semi-assembled options. I've always been fond of Prusa printers (currently have the MK4 and CORE One at work just a few feet from my desk right now), but they do come at a premium price. Personally, for the price, I can't really recommend the Mini+ for your purposes as there are better printers for that price range.