Anycubic Photon Mono M7 Pro

r/AnycubicPhoton·External-Concern-449·Jun 2026

Negative

M7 Pro - Review after almost 8L of Resin and 45000+ layers

I have had this printer for 3 weeks and have approximately 130 hours of prints. I had to replace the ACF film twice at the beginning. I paid to learn from my mistakes. The lid is often difficult to open because it is stuck by the resin that appears to have splashed inside. The resin level never exceeds the MAX. <image> in this photo I don't really know what happened.

YouTube·A3D prints

Positive

Anycubic Photon Mono M7 Pro 🧪 Fast with 14K resolution 🧪 We put it to the test

This 14K resin printer offers high resolution and fast printing speeds, featuring a factory-leveled build plate and a heated resin vat for ease of use, especially for those who prefer a "plug and play" experience.

r/AnycubicPhoton·Queasy-Builder-7994·Jun 2026

Negative

M7 Pro - Review after almost 8L of Resin and 45000+ layers

I regret switching to the Anycbc M7 Pro. I will never go near this brand again. I've tried using the machine for about 9 months. Just so you know, I've been printing with elegoo for a year. I regret switching to the Anycbc M7 Pro. When I first bought it, the prints were streaky and sticky. The resin seemed to be expired. Even though I changed the resin and adjusted the settings, I was getting poor quality prints and incomplete prints. I was experiencing layer shifting. Then I thought the film was defective. I changed the film and the streaks decreased a bit. But now I'm experiencing resin leakage. It wasn't from the tank. It was leaking from the hot air section. The machine and its AI weren't working properly either. When I emailed the company, they just told me things like "desrek settings". I'm an experienced printer and they've done nothing but repeat the same things I did and write "baba" and they just keep rewinding. I will never go near this brand again.

YouTube·PolyWorkshop

Positive

Elegoo Saturn 4 or Anycubic M7? (Ultra, 14K, 16K, Pro and all)

The M7 Pro is presented as a strong competitor to the Elegoo Saturn 4 Ultra, offering a 14K screen and good overall printing performance, though its heating and auto-resin filling systems are criticized.

r/AnycubicPhoton·XwhitexichigoX·Jun 2026

Negative

M7 Pro - Review after almost 8L of Resin and 45000+ layers

Had mine now for a while too and can say it is an awesome machine but there is not only positive, the slicer, photon workshop. sadly really really bad, how many supports just go through the model is so stupid. Second, the firmware seems to be kind of broken, auto fill worked a couple of times, then I had to deselect it and select it again on startup, now it just won't do it anymore. But the positives I can just say yes the failed print detection is awesome 1 or 2 times it was a false positive but hey better one time too often then one time not. Only one thing maybe a few more base profiles would also be awesome like a speed profile that is not directly 0.1mm. Have made my own then with more speed from the 0.1mm profile and a little bit down tuned for 0.05 must say for first just putting in numbers it worked like a charm. Now trying a 0.01mm if anyone has a good one please write me.